Form 18B Penopac Chart

Form 18B is a black and white, sealed/unsealed Penopac Chart. The top is sealed white, then unsealed white, then sealed black and then sealed white. Overall dimensions are 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 19BR Penopac Chart

Form 19BR is a black and white, sealed/unsealed Penopac Chart. The top is sealed white, then unsealed white, then unsealed black, then sealed black and then sealed white. Overall dimensions are 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 18A Penopac Chart

Form 18A is a black and white, sealed/unsealed Penopac Chart. The top most area is sealed white, then unsealed white, then sealed black and then sealed white. Overall dimensions are 5-1/2 x 10 in (140 x 254 mm).

Form 1B Penopac Chart

Form 1B is a black and white, sealed/unsealed Penopac Chart. The top most area is sealed black, then sealed white and then unsealed white. Overall dimensions are 7-5/8 x 11-3/8 in (194 x 289 mm).

Higher Whiteness Opacity Charts

Higher whiteness versions of Forms 2A, 3B and 5C are available under the product codes Forms 2A-H, 3B-H and 5C-H, respectively. Forms 2A, 3B and 5C have an approximate Y-reflectance of 82-83% which is typical of standard production and used by most customers. Forms 2A-H, 3B-H and 5C-H have an approximate Y-reflectance of 86-87% and are used by some customers who have found benefits in using higher whiteness charts. For most users, this slight difference in reflectance has no effect on test results. In cases where the test coating is not applied to full hiding, an effect on colorimetric measurements may be observed due to the increased re?ectance of the white area. The higher level of whiteness is achieved without the use of optical brighteners.nnSize and packaging details for Forms 2A-H, 3B-H and 5C-H are identical to Forms 2A, 3B and 5C, respectively.

Form 605C Plastic Laminated Chart

This chart is an alternative to standard Leneta Opacity Charts which are sealed with a clear topcoat. Form 605C is preferred by some users for use with coatings containing strong, slow drying solvents or when a test surface with different wetting characteristics is desired.

Form 14H Opacity Chart

Form 14H is a black and white sealed opacity chart divided into four sections: the top most area is white, then black, then white and then black. Overall dimensions are 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 5C Opacity Chart

Form 5C is a black and white sealed opacity chart. The top half is white and the bottom half is black. Overall dimensions are 7-5/8 x 10-1/4 in (194 x 260 mm).

Form 3B Opacity Chart

Form 3B is a black and white sealed opacity chart. The top and bottom are white, middle section is black. Overall dimensions are 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 2C Opacity Chart

Form 2C is a black and white sealed opacity chart. The top is black the bottom is white with overall dimensions of 7-5/8 x 10-1/4 in (194 x 260 mm).

Form GB-31 Plain Gray Chart

Form GB-31 is a sealed Plain Gray Chart with overall dimensions of 7-5/8 x 11-1/4 in (194 x 286 mm).

Form WM Plain White Chart

Form WM is a sealed Plain White Chart with overall dimensions of 5-1/2 x 11-1/4 in (140 x 286 mm).

Form WK Plain White Chart

Form WK is a sealed Plain White Chart with overall dimensions of 8-5/8 x 11-1/4 in (219 x 286 mm).

Form WH Plain White Chart

Form WH is a sealed Plain White Chart with overall dimensions of 11-1/4 x 17-1/4 in (286 x 438 mm).

Form WG Plain White Chart

Form WG is a sealed Plain White Chart with overall dimensions of 3 x 5-1/2 in (76 x 140 mm).

Form WF Plain White Chart

Form WF is a sealed Plain White Chart with overall dimensions of 3 x 7-1/4 in (76 x 140 mm).

Form WD Plain White Chart

Form WD is a sealed Plain White Chart with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form WB Plain White Chart

Form WB is a sealed Plain White Chart with overall dimensions of 7-5/8 x 11-1/4 in (194 x 286 mm).

Form WA Plain White Chart

Form WA is a sealed Plain White Chart with overall dimensions of 5-1/2 x 10 in (140 x 254 mm).

Form 6F6 Duplex Applicator Chart

Form 6F6 is a black and white Duplex Applicator Chart with overall dimensions of 3 x 7-1/4 in (76x 184 mm). It has six black bars on a white field.

Form 6F4 Duplex Applicator Chart

Form 6F4 is a black and white Duplex Applicator Chart with overall dimensions of 3 x 7-1/4 in (76x 184 mm). The top half has four black bars on a white field and the bottom half is plain white.

Form WDX Brushout Card

Form WDX is a sealed plain white Brushout Card with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form 5DX-GW Brushout Card

Form 5DX-GW is a sealed gray and white Brushout Card. The top half is white and the bottom half is gray with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form 5DX is a sealed black and white Brushout Card. The top half is white and the bottom half is black with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form WKX Plain White Card

Form WKX is a sealed Plain White Card with overall dimensions of 8-5/8 x 11-1/4 in ( 219 x 286 mm).

Form WHX Plain White Card

Form WHX is a sealed Plain White Card with overall dimensions of 11-1/4 x 17/14 in (286 x 438 mm).

Form WDX Plain White Card

Form WDX is a sealed Plain White Card with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form WBX is a sealed Plain White Card with overall dimensions of 7-5/8 x 11-1/4 in (194 x 286 mm).

Form BK Plain Black Chart

Form BK is a sealed Plain Black Chart with overall dimensions of 8-5/8 x 1-1/4 in (219 x 286 mm).

Form BH is a sealed Plain Black Chart with overall dimensions of 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 2DX is a sealed black and white Brushout Card. The top half is black and the bottom half is white with overall dimensions of 3-7/8 x 6 in (98 x 152 mm).

Form 10H-BG is a black and gray sealed Spreading Rate Chart with a checkerboard pattern. Overall dimensions are 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 10H is a black and white sealed Spreading Rate Chart with a checkerboard pattern. Overall dimensions are 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 10B is a black and white sealed Checkerboard Chart with overall dimensions of 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 10A is a black and white sealed Checkerboard Chart with overall dimensions of 5-1/2 x 10 in (140 x 254 mm).

Form 9B is a black and white sealed Opacity-Display Chart. The top most area is striped, then black and then white, with overall dimensions of 7-5/ x 11-3/8 in (194 x 289 mm).

Form 9A is a black and white sealed Opacity-Display Chart. The top most area is striped, then black and then white, with overall dimensions of 5-1/2 x 10 in (140 x 254 mm).

Form 21B is a black and white sealed Opacity-Display Chart. The top most area is white, then black and then striped, with overall dimensions of 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 13H-H is a black and white sealed Spreading Rate Chart. The top and bottom of the chart have a diagonally striped or zebra pattern and the center of the chart is divided into a black horizontal area on top and a white horizontal area on bottom. Overall dimensions are 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 12H is a black and white sealed Spreading Rate Chart. The chart has a diagonally striped or zebra pattern with a rectangular center which is top half white and bottom half black. Overall dimensions are 11-1/4 x 17-1/4 in (286 x 438 mm).n

Form 8K is a black and white sealed Display Chart which also serves as a half-size Spreading Rate Chart. The chart has a diagonally striped or zebra pattern, with overall dimensions of 8-5/8 x 11-1/4 in (219 x 286 mm).

Form 8H-GW is a gray and white sealed Spreading Rate Chart. The chart has a diagonally striped or zebra pattern, with overall dimensions of 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 8H is a black and white sealed Spreading Rate Chart. The chart has a diagonally striped or zebra pattern, with overall dimensions of 11-1/4 x 17-1/4 in (286 x 438 mm).

Form 8B is a black and white sealed Display Chart with a diagonally striped or zebra pattern. Overall dimensions are 7-5/8 x 11-3/8 in (194 x 289 mm).

Form 8A is a black and white sealed Display Chart. The chart has a diagonally striped or zebra pattern, with overall dimensions of 5-1/2 x 10 in (140 x 254 mm).

Form HB is a plain white, sealed/unsealed Penetration Chart with overall dimensions of 7-5/8 x 11-1/4 in (194 x 286 mm)

Form 1A Penopac Chart

Form 1A is a black and white, sealed/unsealed Penopac Chart. The top most area is sealed black, then sealed white, then unsealed white. Overall dimensions are 5-1/2 x 10 in (140 x 254 mm).

Form 2A Opacity Chart

Form 2A is a black and white sealed opacity chart. The top is black and  the bottom is white with overall dimensions of 5-1/2 x 10 in (140 x 254 mm)